Upgrading hardware Watchout 6

[jcvargas]

Hello friends, I'm thinking of upgrading my server to the following characteristics.

Core i7 4790k 4 cores

Asus Z87PRO

FURY Kingston HyperX 16GB DDR3 Network Series

Kingston SSDNow V300 Notebook 240GB

Sapphire AMD FirePro W600 2GB GDDR5 6 Mini DisplayPort

I want support telling me if it supports watchout6.

and if the same list is used Tweaking 2.1.

Thank you

[Umberto Nelini]

I'll be worried about the firepro W600, it's a particular card made for digital signage with low gpu memory and personally I would use it only for fixed installations with low bitrate videos if all 6 outputs are in use. There's a discussion in the forum about 6 outputs graphic cards.

[Akash]

Hello 

 

JCVARGAS 

 

I have being using same Sys config which you mentioned Above only The SSD am using corsair Series LS MLC Nand Till Now i have not been facing any problem till now. 

[jfk]

 

Hello friends, I'm thinking of upgrading my server to the following characteristics.

Core i7 4790k 4 cores

Asus Z87PRO

FURY Kingston HyperX 16GB DDR3 Network Series

Kingston SSDNow V300 Notebook 240GB

Sapphire AMD FirePro W600 2GB GDDR5 6 Mini DisplayPort

I want support telling me if it supports watchout6.

and if the same list is used Tweaking 2.1.

Thank you

 

 

Dataton support is not going to provide any unequivocal statement on a system config.

From a simple specification standpoint, yes, that setup will allow WATCHOUT 6 to open and run.

From a performance standpoint, I agree with jcvargas, the w600 is a minimal performer.

Bumping in to its limits all depends on content demands.

For example, I would not try pixel mapping WO6 3D projectors with that graphics card.