klauskk Posted November 26, 2015 Report Share Posted November 26, 2015 Hi. I have installed a new pc with win7 Pro and a Blackmagic Decklinc Quad capture card. The capture card is working in Media Express. All inputs. One detail: it seems that the capture card in Media Express is using a bit time before the picture appears. On a different mediaserver software (Isadora from TroikaTronix) I have all the 4 inputs active at the same time. But in Watchout I only get input from a Panasonic camera. The signal from the camera is 1080 50i, but I get picture even if I change the settings for video standard in Live Video. I have two Marshall cameras. They output 1080 25p signal, but I don't get a picture in any of the capture card inputs. I also have a Teradek Bolt system which I don't get a picture from. I've tested the signal on a sdi monitor, where I also get confirmed what video standard they give. I've tried all the different settings in video standard for all of the cameras. But no result. The signal from the Panasonic camera works fine on every input. But the other cameras won't give a picture in Wathout. In Media Express and in Isadora, I have the pictures from all cameras. The card is installed on a PCIe slot with 16x speed. What is wrong here? I've used this setup with great success before. The only difference is that I have upgraded the pc hardware. Best Klaus Kottmann National Theatre in Oslo Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.