Vollmers Posted January 13, 2016 Report Share Posted January 13, 2016 Hi I'm finalising a show, but I have to change the colour on some of the solid objects I have in the show. My issue is not how to change the colour, but if it's possible to use RGB or HSV values? It have to be a perfect match to a defined colour, and it's almost impossible to change on the tiny tween wheel inside Watchout. So if anyone has a trick up their slevve, I will be happy Cheers Christian 0 Quote Link to comment Share on other sites More sharing options...
Martin Pfeifer Posted January 14, 2016 Report Share Posted January 14, 2016 Did you overlook the little Color sqare? One click on it opens the selection of the HSB, RGB or CMY sliders with numerical input fields. Martin 0 Quote Link to comment Share on other sites More sharing options...
Mike Fahl Posted January 14, 2016 Report Share Posted January 14, 2016 Look under the "HSB." heading a bit down in this document: http://academy.dataton.com/wo6/Cues.xhtml#toc_marker-7-4 You can specify color as HSB, RGB or CMY values. Mike 0 Quote Link to comment Share on other sites More sharing options...
Vollmers Posted January 15, 2016 Author Report Share Posted January 15, 2016 I didn't overlook the color space button, and I did find the color chooser. The challenge is, that I always get a RGB value, when a designer send the coulour spec. I can use Photoshop to get the other values, but when I enter Watchout I can only change the value by changing the percentage value. So I have to do some calculation, instead of just entering the basic RGB values. Not impossible, but takes some time. I've tried to attach an image to explain what I mean. Hopefully it could be something in a future upgrade Cheers Christian 0 Quote Link to comment Share on other sites More sharing options...
Mike Fahl Posted January 16, 2016 Report Share Posted January 16, 2016 Perhaps you mean you want to enter 8-bit component values (0...255) rather than a percentage? Yes, then a simple scale factor needs to be applied. If so, you may want to submit a feature request to allow those values to be entered as 0...255, or possibly even as hex values (e.g., #FF2055), as both are common formats to describe RGB color components. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.