Member Morten Ranmar Posted November 24, 2022 Member Report Share Posted November 24, 2022 I just updated an old Win7 computer to Win10 pro, and went through the tweaking list. Have set a static IP, and can see that it still connects to internet - but when it boots up into Watchpoint, there is no IP number displayed and it is unreachable. Any suggestions? 0 Quote Link to comment Share on other sites More sharing options...
Alex Ramos Posted November 29, 2022 Report Share Posted November 29, 2022 No ping response, check firewall also make sure the license key is properly inserted. 0 Quote Link to comment Share on other sites More sharing options...
Moderator jfk Posted November 29, 2022 Moderator Report Share Posted November 29, 2022 On 11/24/2022 at 8:18 AM, Morten Ranmar said: I just updated an old Win7 computer to Win10 pro, and went through the tweaking list. Have set a static IP, and can see that it still connects to internet - but when it boots up into Watchpoint, there is no IP number displayed and it is unreachable. Any suggestions? That can occur when watchpoint loads at startup before Windows has completed its initialisation. Quick test is to simply manually quit and restart watchpoint without restarting Windows. If the restart test is clean, then adding startup delay to watchpoint should address the issue. 0 Quote Link to comment Share on other sites More sharing options...
Alex Ramos Posted December 5, 2022 Report Share Posted December 5, 2022 I had a similar problem and the culprit was the GPU driver. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.