joeartist Posted December 6, 2019 Report Share Posted December 6, 2019 I am working on a system design where there is a redundant backup system, however, am stuck with one aspect of WO TCP/IP and Serial Commands to control the projectors. If I have both production computers receiving midi and those computer are talking to separate WO display computers, how do I prevent the video projectors from seeing 2 control commands over IP (e.g. shutter commands)? The only solution I can com up with is use serial com ports from each computer to the projectors with an AB switch and not use IP to send those commands. Any other thoughts out there would be helpful. Joearist 0 Quote Link to comment Share on other sites More sharing options...
Mike Fahl Posted December 8, 2019 Report Share Posted December 8, 2019 Why would it matter if it gets the command twice? They should both say the same thing pretty much at the samr time anyway, shouldn't they? Mike 0 Quote Link to comment Share on other sites More sharing options...
Dataton Partner Benoit Posted December 8, 2019 Dataton Partner Report Share Posted December 8, 2019 Hi, Can you control your projectors using DMX? If so, you can output ArtNet from your two producers and use an ArtNet to DMX converter that handle backup like the nodes from luminex... Good luck, Benoit 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.