Jump to content
Dataton Forum
dvelilla

Capture with Decklink SDI

Recommended Posts

Hello,

 

I´ve been having the following issue when capturing SDI signal using Decklink SDI and SDI Duo: Sometimes the captured image (SDI, 1080i 5994) inside watchout shows someting I call "fields", like a deinterlaced signal with horizontal stripes. I´ve checked the input source (usually a digital switcher at 1080i 59,94) with the card´s software and it´s ok, I´ve tried every setting from the live video window, tried scalling down and up, moving the cue, and the only thing that sometimes seems to work is leaving the cue at 100% or 75% scale

I used to think that maybe the Kramer SDI splitter I use to send the image to several displays was somehow interfering, but I´ve seen this conecting directly one camera to one display too.

And sometimes, with same settings, same input, same hardware, etc, it works ok one day, but not the next one. Any ideas?

My computers are Intel core i7 920 @ 2,67 GHz, 4GB in ram, windows 7 32 bits

Thank you

 

Diana Velilla

Share this post


Link to post
Share on other sites

Yes, I´ve tried using de-interlace. The only result is more frames of delay. I´ve also tried 1080p, same problem. In our last show I had the input rotated a few degrees on Z and the stripes were vertical!

I appreciate any help, thanks

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...