MISTERK Posted May 17, 2022 Report Share Posted May 17, 2022 Hi all Can i mix different resolutions (same frequence=50hz) within a watchout display ex: 1 output 3840x2160@50hz and another at 1920x1080@50hz or all resolutions must be the same ? To do this, any differences between nvidia and Amd ? or is it impossible with Watchout ? Thks 0 Quote Link to comment Share on other sites More sharing options...
Moderator jfk Posted May 17, 2022 Moderator Report Share Posted May 17, 2022 4 hours ago, MISTERK said: Hi all Can i mix different resolutions (same frequence=50hz) within a watchout display ex: 1 output 3840x2160@50hz and another at 1920x1080@50hz Yes. As long as all are same refresh rate, no problem. 4 hours ago, MISTERK said: or all resolutions must be the same ? No 4 hours ago, MISTERK said: To do this, any differences between nvidia and Amd ? No 4 hours ago, MISTERK said: or is it impossible with Watchout ? it is possible. This was an improvement during the WATCHOUT 6 run. Can not recall which 6 version added this, but it has been a while now. 0 Quote Link to comment Share on other sites More sharing options...
Dataton Partner RBeddig Posted May 17, 2022 Dataton Partner Report Share Posted May 17, 2022 Yes, it works but be aware that you can't frame lock displays with a sync board when you use different resolutions. This would only work if all outputs see the exactly same EDID. 0 Quote Link to comment Share on other sites More sharing options...
MacDVD Posted June 30, 2022 Report Share Posted June 30, 2022 I'm using watchpax 20, with 4 different resolutions. 1 3930*1920 2 2880*2430 3 3360*1620 4 3168*1152 the output is on ledwall, and everything is in sync, i'm using HAP videos 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.