barco Barco UDX-W32 IP control

[Marc L]

Anyone manage to get ip control of the newer Barco 30k Lasers? They dont support pjlink, and the usual barco hex strings dont seem to work either. 

Hell, they wont even let you log into the web ip address unless you know to specify port 9999, which seems to be the pulse address. 

I also found a copy of the JSON-RPC 2.0. command guide, which it seems to use to communicate, but im not much of a programmer and even copying their example code in many different ways didnt seem to help. 

My end goal is shutter commands, power would also be useful, but its the only projector ive used that i cant get network shutters. 

Thanks, -Marc L

[Benoit]

Hi Marc,

Pulse protocol should work with Watchout, the string to power on the projector should looks like:

{"jsonrpc": "2.0","method": "system.poweron"}

and I think the default port is 9090.

Hope this help.

Benoit

[seaghanmckay]

Hey everyone,

I'm installing the same model projector on a show next week.  Did the string listed above work for you?

If so, could anyone list the strings for Shutter Open and Shutter Close?

 

Thanks

Seaghan