Jump to content

wiesemann

Member
 View Profile  See their activity

  • Posts

    167

  • Joined

  • Last visited

 Content Type 

Everything posted by wiesemann

  1. wiesemann
    I had exactly as a feature request at the beginning of the pandemic. WO is so good at orchestrating and playing back, that I had thoght it could be useful for virtual multiscreenplayback. Maybe with a different licensing model.
  2. wiesemann
    disable any networkadapter except on that you will be using. I would try to avoid spaces, Sonderzeichen and Umlaute in file and foldernames. Just my 2€
  3. wiesemann
    hm, did you try a 16 bit mono wav? Did you check with the TC tool that comes with WO? Did you try another TC-Reader to validate the TC itself? Any chance to post that TC file? Just out of curiosity.
  4. wiesemann
    when in doubt sync WO and the others to a different timecode playing device. Have successfully used an iPad for that in the past.
  5. wiesemann
    Cool. All this could have been mentioned in the Watchout Manual. Maybe next time Nice weekend.
  6. wiesemann
  7. wiesemann
    Make sure, you only have one network interface active. But you knew that. cheers
  8. wiesemann
    Hi… Did you try the Jpegs? Have you tested all tgis with the main timeline as well? My Experience of „flashing“ at a pause/loop-cue is that it only occurs on Aux-timelines. When I used he Main-timeline, the issues were not happening. For further testing on whats happening I place a colorbar image on the main timeline and just would let it sit there, displaying it. Starting an Aux-timeline with any content above would show this colorbar image for a fraction of time at the pause/loop cue. I filmed this in slow on the phone and have posted here some years ago. As proof of whatever this is. ——- As a result of never having this issue really resolved I am avoiding looping with cues OR place that same content on the main timeline below it. Going to different Maintimeline cues while playing the Aux-TL can be „programmed“ with cues. cheers
  9. wiesemann
    well, why not use MIDI for fading? As you originally planned… Much easier than dealing with DMX (I really wish one could work with DMX „offline“). Use a cheap device (search for MIDI fader) like a Korg Nanokontrol 2. Or,go the software route if you have an extra computer, maybe even wich touch monitor. In that case you could use one of my favorite programs, OSC Pilot. Watchout is able to „learn“ which Midicontrol-change(s) you are using.
  10. wiesemann
    Maybe tell us, what your general plan is. Unless it is a secrec business idea, of course. Like… what device(s) do you want the videos to be shown on? What made you think of Watchout, which has its special powers in distributing video across multiple screens.. on cue. (very much simplified). You could have all your videos loaded into watchout and have some touch-panel for selecting the clips to play. They would all have their indiviual timelines or. (I know there are different ways to do this) No need for a webpage in that case. .
  11. wiesemann
    I would try going with 16 Bit stereo wav-files.
  12. wiesemann
    Streamdeck/Companion is really good. I was thinking of the OSC/Pilot more because of the faders. Probably a combination would be the best, since Companion can trigger „start/pause/stop“ out of the box and OSCpilot can have a whole bunch of faders…
  13. wiesemann
    Dont know the Yamaha device. But it probably „understands“ MIDI and/or OSC, So I‘d look at OSCPilot, especially if you want to use a touchscreen.
  14. wiesemann
    ——————— I have to chime in here, of course. With my advice to not try looping in WO. That flashing Black you see is actually transparency, place a bright color on a layer beneath the looping points. You will see this flashing instead of black. I tried this with images, videos… doesnt matter, It wont loop seamlessly. So here is the actual advice, make the sequences you want to loop really long, so they dont have to loop as a sequence but playback the looping clips.
  15. wiesemann
    After trying to seamlessly looping either videos or dissolving slideshows using freerun or two play/pause cues I have come to the conclusion to never try it again, but instead just repeat clips/images in really long timelines, so a loop is not necessary. It just doesnt really do it.
  16. wiesemann
    Do you need to see them all at the same time, all the time? Otherwise you could switch before going into Watchout, saving bandwidth..
  17. wiesemann
    Well, when the audio is not looping you will have to stack them on two tracks with a fading overlap. Make on track, then copy it, place it and then copy the two… You might want to add a temporary play cues for easier „snapping“ of the fade-points. Remove those when done.
  18. wiesemann
    What I have done after detecting that looping seems to not a strength in WO with images or films either, I just created really long timelines instead of loops, I think 24h is max.. Maybe that is an option.
  19. wiesemann
    Wav, 16 bit, Auxtimeline or Main?
  20. wiesemann
    I had to work on a project that someone else had started (of course, never my fault..) and DMX was not working correctly. It was set to 16 bit instead of 8… Who knows…
  21. wiesemann
    Is this a 2 channel 16 bit audio wav?
  22. wiesemann
    Hey Dataton, please add OSC In and Out and NDI Output as new additional features. cheers.
  23. wiesemann
    Hi, it looks like the visuals had been tiled in 3DMax already, around 300 or 500 square pixels they are really tiny. The textures should be „baked“ to fit to the object before exporting from 3DMax. You can check by exporting and reimporting/opening the object and the texture into a new file in 3DMax.
  24. wiesemann
    weird. Try using vMix Desktop Capture instead of Newteks tool. Has never let me down for years. Make sure you only have one Network Interface active on the Windows machine. Start the NDI track at the beginning of your timeline, fade it in when needed.
  25. wiesemann
    I had this error myself 4 years ago and was recommended to uninstall any additional codec packs, remove anything called DVD Maker (which I did not have) or even reinstall the OS. I dont remember what did it, I guess it was the codecs...
×
×
  • Create New...